A magnetic wall thickness gauge measures the full wall of a plastic or glass bottle, with a probe on the outside and a small steel ball on the inside. A coating thickness gauge measures a thin layer of paint or plating on a metal part. Both are sold as magnetic thickness gauges, but they answer different questions.
Two instruments that share the word magnetic
Search for a magnetic thickness gauge and you will find two kinds of instrument. One is a coating gauge for paint, powder coat or plating. The other is a wall thickness gauge for bottles, containers and other non-magnetic parts.
The names overlap because both use a magnetic field. What they measure, and what they need from the part, is different.
How a magnetic ball wall thickness gauge works
This type is also called a Hall-effect thickness gauge. The probe holds a magnet and a Hall sensor, whose output changes with the strength of the magnetic field near it.
A steel target ball sits inside the bottle and the probe touches the outside. The ball is drawn to the point opposite the probe tip, so only the wall lies between them. As the wall gets thicker, the ball sits farther away and the field at the sensor weakens. Our article on how a Hall-effect thickness gauge works explains the physics in more detail.
The wall itself must be non-magnetic, and you need access to both sides so that the ball can get in. Keep steel benches, brackets and electronic devices away from the probe while you measure.
Our Hall-effect bottle wall thickness gauge is built for non-destructive wall and base checks on non-magnetic materials such as plastics and glass. As you move the bottle over the probe, it shows the live value and captures the maximum, minimum and average.
How a coating thickness gauge works
ASTM D7091 describes the magnetic and eddy current gauges used for dry film thickness. They measure nonmagnetic coatings on ferrous metals, and nonmagnetic, nonconductive coatings on non-ferrous metals.
The standard groups these gauges as magnetic pull-off and electronic types. Both use a probe or magnet to measure the gap between the probe and the base metal, then display that gap as coating thickness.
So a coating gauge needs a metal base under the layer. A plastic or glass bottle has no metal base, which is why a coating gauge cannot give you the wall thickness of a bottle.
D7091 also notes that coating thickness varies across a surface, so single readings may not represent the whole coating. Specifications then set a minimum and a maximum thickness for each layer.
Not sure which gauge your parts need? Tell us what you need to test. We test a similar material sample and send you the video, so you do not need to ship a sample. If you prefer to send your own, we accept that too.
Which one fits bottles, preforms and containers
For the wall and base of a bottle or container in plastic or glass, the ball type is the one to look at. The applications listed for our gauge cover PET and HDPE bottles and containers, glass bottles, vials and ampoules, and preforms. Our guide to PET bottle wall thickness shows how to map the shoulder, body, heel and base.
For paint, powder coat or plating on steel, the coating gauge is the one to use. A steel part is outside what a ball type gauge can measure, because the method needs a non-magnetic wall.
Ultrasonic gauges are a third option that works from one side. ASTM E797 covers the pulse echo contact method for materials that carry sound at a constant velocity and return a clear back wall echo. It is mainly meant for flat parts with parallel surfaces, with limited use on curved or concentric ones.
If your part is not on our application list, tell us first. We can then say whether a ball type gauge makes sense for it.
Questions to ask before ordering
A few questions settle most choices between these instruments. Answer them before you ask for quotes.
- Is the part made of a non-magnetic material such as plastic, glass or aluminium?
- Can a steel ball get to the inside of the wall at every point you need?
- Do you need the whole wall, or one coating layer on top of metal?
- Which zones matter, such as shoulder, heel, base or a handle area?
- Do you need the thinnest point in a scan, or repeat readings at fixed marks?
If the answers point to a whole wall on a non-magnetic part with access to both sides, a magnetic ball gauge is the instrument to look at. If they point to a layer on steel, look at a coating gauge instead.
Frequently asked questions
Can a coating thickness gauge measure a plastic bottle wall?
No. A coating gauge measures the gap between its probe and a metal base. A plastic bottle has no metal base for it to read against.
Can a magnetic ball wall thickness gauge measure paint on steel?
No. The method needs a non-magnetic wall, and a steel base would hold the target ball in place instead of letting it follow the probe.
Does a test video replace a quotation?
No. The video shows the method on a similar material sample. For a quotation, tell us the material, the wall thickness range, the container size and the quantity.
Get a test video for your bottles
Tell us what you need to test, such as the material, the size and the test method. We test a similar material sample on the instrument you are looking at and send you the video, so you do not need to ship a sample. If you prefer to send your own, we accept that too.
Questions about a model or a test? Email Amy Zhao, Export Manager, at [email protected].